Home > Knowledge > Content

Concrete mixer daily maintenance knowledge

Aug 29, 2019

Concrete mixers require daily maintenance and are well understood by many operators. However, what is needed to maintain the concrete mixer in daily production is not known to many operators. So let's take a closer look at what the concrete mixer needs to do for routine maintenance.

Regular maintenance and repair work on concrete mixer equipment. If the blade or liner is found to be worn, it should be replaced as appropriate. Regularly check the transmission gear and apply grease to extend its service life. In order to prevent the residual concrete from solidifying and agglomerating, and hinder the normal operation of the machine, the concrete mixer and the discharge hopper should be cleaned every four hours, and the inspection work should be done regularly to ensure the efficient operation of the production equipment.

Regularly do the lubrication and maintenance work of equipment bearings, reducers, etc., dry and dry in summer, do a good job of lubrication of the machine to a certain extent not only can resist the dry weather, but also extend the service life of the equipment. The oil pressure of the air compressor should be kept on the oil mark when working. When the oil level is lower than the oil mark, a new compressor oil must be added. It is strictly forbidden to work in the oil-free state.

Regular maintenance of the concrete mixer can ensure the efficient operation of machinery and equipment, improve production efficiency and reduce production failures.