Home > News > Content

Mechanical Moving Parts Of Small Concrete Pumps

Feb 28, 2017

1, regularly check the state of the mixing shaft seal.

2, each time to replace the shaft seal, the sealed cavity to be filled with grease.

3, regularly check the mixing blade wear conditions, timely repair or reinforcement.

4, each class will stir the pump concrete piston from the tank into the tank to check once, and found that the concrete piston is worn, in a good state, the best touch of grease on the concrete piston, to prevent concrete piston wear caused by concrete Abnormal wear of the cylinder, providing concrete piston and conveyor tank life.